Photech Amphibious Light Spares

Sets of 1 x 35w, 3 x 20w or 5 x 20w were available (see below) the products have now been withdrawn but parts are still available

Low voltage lighting selection page

To reprint original instruction manual click here – please see below the change in layout/assembly to the 5 light set. Requires Acrobat Reader.

Each set has a mains transformer with a 3 metre mains cable THEN:

The PA35 single light set (1 x 35 watt light) then has a 10 metre low voltage cable from the transformer to the light.

The PA320 three light set (3 x 20 watt lights) then has a 5 metre low voltage cable which runs from the transformer to a 3 way connector. Each of the 3 lights is then fitted with a further 5 metres of cable which each plug into the connector.

The PA520 five light set (5 x 20 watt lights) then has a 5 metre low voltage cable which runs from the transformer to a 3 way connector, off this you can fit two of the lights on their 5 metre cables. A five metre cable only is then supplied. This plugs into the third connection and goes to another 3 way connector. Off this you can run the remaining lights that each stretch 5 metres. This makes it a very flexible system. Click here to see diagram of assembly layout.

N.B. Do not add Extras lights to any of the sets as the transformers are designed only to take the specified number of lights.

Spare extension cables and extension connectors are available to allow the systems to be extended even further.

The sets have a 2 year guarantee.